High Technology

• with one servomotor driven bandrapier
• with two servomotor driven bandrapiers
• with a shuttle weft insertion system, suitable to weave synthetic fabrics and felts, single or multilayers, with closed weaving edges

• driven by complementary cams, running in oilbath
• driven by a crankshaft, running in oilbath

• possibility to weave fabrics with regulations as “mesh”, “cm” or “french number”; warp-tension control and regulation by servomotors

the loom can be equipped with different warpbeams types, such as:

• single-fl at warpbeams; ring-or stir warpbeams
• warpbeams with canister
• 2 or more warpbeams running “in line” and fi tted to the loom with a separate supporting structure, controlled by servomotors for the separate warp-tension control and regulation

• the fabric tensioning and the mesh adjustment is carried out by a 3-roller system, controlled by servomotors

• the fabric tensioning and mesh adjustment is carried out by only one beam, suitable also for the direct upwinding of the woven fabric

• with a TRINCA DOBBY, driven by servomotors and controlled by a PC, which allows to carry out all heddleframe adjustments, one indipendent from the other by the keyboard. Beside numerous further advantages, this dobby allows also to operate with “open shed” or “closed shed”, operating mode changed only by a key on the PC

• by a personal computer which controls and synchronizes all weaving functions, as well as also the various modular equipment and devices listed

• standard programs can be customized for individual requests

• for a fabric cut in different strips directly on the loom during the weaving process

• for the weft preparing and cut, controlled by the PC

• separetly motorized, with tension adjustment of the waste

• three prespooler models, T300 - T600 and T1000, built in 3 different dimensions, prepared to be connected to the loom and suitable for each diameter and material quality to be woven

Beamers equipped with microprocessors, suitable for the tension control and adjustment of the warp:

• warping devices for fl at warpbeams with conical warping
• warping devices for ring (stir) warpbeams
• warping devices for canister

• this device is prepared to cut and to weld the edges directly on the loom during the weaving process

• this device is suitable for the forming of closed edges by folding the weft and closing it into the fabric during the weaving process

• this device allows to weave with more than one weft, even with different weft diameters and wire/yarn qualities

• this device is suitable for the crim-ping of weft and also warp wires

• this device allows to prepare precrimped wires and rods with larger diameters for the weaving process

• this is a special weaving machine, suitable for weaving very heavy fabrics with pre-crimped wires